Water pipe leakage: Explore the reasons behind it and preventive measures

Leaking water pipes are a common problem in home life, which not only causes inconvenience, but may also cause considerable damage to household property. To solve this problem, you first need to understand the reasons behind it. In this article, we will explore the five major causes of water pipe leakage, and provide the corresponding preventive measures.

First, the raw material problem

The quality of the water pipe material directly determines its durability and reliability. If you use the quality of the pipe, such as the pipe wall is too thin, the material strength is not enough, it is easy to lead to aging, rupture, which in turn triggered the leakage. To avoid this situation, it is recommended to choose a well-known brand in the purchase of water pipes, and ensure that the quality of the pipe meets the relevant standards.

Second, improper design and construction

Irrational design or construction is not standardized is also an important cause of water pipe leakage. For example, the size of the reserved hole in the pipe does not match the design of the plug hole, resulting in pipe displacement or burst; water pipe connection is not handled well, there is a gap or not using the appropriate fittings to connect and so on. Therefore, in the renovation, should ask professionals to design and construction, to ensure that the pipeline installation specifications, reasonable.

Third, the impact of environmental factors

Environmental factors also have a great impact on the service life of water pipes. For example, the acid and alkali composition of the soil, groundwater chemicals and temperature changes, etc., may cause corrosion or deformation of water pipe materials. Especially in northern regions, the severe cold of winter may cause water pipes to freeze and crack. Therefore, for water pipes that may be affected by environmental factors, appropriate protective measures should be taken.

Fourth, long-term use of wear and tear

Water pipe in the process of use will gradually be subjected to wear and tear, especially under the action of water flushing and pressure inside the pipe, the thickness of the pipe wall will gradually become thin. In addition, the pipeline interface will be loosened or aging due to long-term use. Therefore, regular inspection and maintenance of water pipes is very important, and timely replacement of serious wear and tear of the part to ensure the normal operation of the pipeline.

V. Poor geological conditions

In some areas, geological conditions may pose a threat to the safety of water pipes. For example, corrosive substances in the soil may cause corrosion of the water pipe; uneven settlement of the soil may lead to deformation or fracture of the water pipe; natural disasters such as earthquakes may also cause damage to the water pipe. For these situations, appropriate preventive measures should be taken in the design and construction, such as the use of corrosion-resistant materials, reinforced water pipe support.

Six, how to find out the leakage point

The use of pipeline leak detector can effectively find out the pipeline leakage point

In general, the basic detection method is to connect the pipe leak detector good host, headphones, sensors. Turn on the pipeline leak detector switch, wear a good headset, in the pipeline above the road surface placed pipeline leak detector sensor, according to the pace of the length of a step by step placement, step by step listening, the closer the leak, the stronger the signal, the farther away from the leak, the weaker the signal, through the comparison of the signal between the different points of the strength of the leakage to achieve the purpose of detecting leaks. Therefore, we use pipeline leak detector, single in a point listening to the leakage signal is meaningless, to be more than one point repeatedly compared, compared to which the sound vibration of the larger place is the leakage point, of course, we also need to consider a lot of other additional factors, such as leakage point of the direction of the broken mouth, because the pipe is round, if the side of the leakage, may be larger instead of in the pipeline above the pavement on the side of the pipeline, rather than the pipeline above the pavement, so for the pipeline above the pipe. Pipeline above the road, so for the location of the pipeline to be aware of, in addition to the tee, bends, water pressure, depth of burial, buried layer, etc. will have an impact on the detection of these to be taken into account.

In short, to prevent water pipe leakage problems, need to start from many aspects. In the purchase of water pipes to choose high-quality brands, to ensure that the installation specification, to take effective protective measures, regular inspection and maintenance and attention to the impact of geological conditions are key links. Through the combined use of these measures, you can effectively reduce the risk of water pipe leakage, bringing more convenience and comfort to home life.