Views: 16 Author: Site Editor Publish Time: 2023-11-28 Origin: Site
Leaking water pipe in wall is a headache problem, which will not only cause water waste, but also damage to the wall. In order to find and solve the problem of leaking pipes in the wall in time, this article will introduce some practical detection methods.
1. Observation method
Observation method is a simple and practical way to initially determine whether the water pipe leakage in the wall. If the surface of the wall appears wet, seepage or peeling phenomenon, it is likely to be the wall water pipe leakage. At this time, you need to carefully observe the appearance of the wall, and pay attention to whether there are water marks, mold and other abnormal phenomena.
2. Listening method
Water leakage detector listening method is a more practical method, water leakage detector can initially determine the location of the leakage of water pipes in the wall. In a quiet environment, close to the wall to listen to the sound of water flow or dripping sound. These sounds are usually caused by leaking water pipes. If the leak detector can hear the obvious drip sound or water flow sound, you can initially determine the existence of water leakage of water pipes in the wall.
3. Temperature method
Temperature method is by observing the temperature change around the water pipe to determine whether the leakage method. If there is a leak in the wall pipe, the water flow will take away a certain amount of heat, resulting in temperature changes around the pipe. This temperature change can be detected using a thermal imager. When detecting this, you need to hold the thermal imager close to the wall and observe if there are any abnormal temperature changes. If there is, it may be the location of the water pipe leakage in the wall.
4. Water pressure method
The water pressure method is a relatively simple method to initially determine whether the water pipe in the wall is leaking. After turning off all water sources and faucets, open a faucet and observe the changes in water flow and water pressure. If the water flow becomes smaller or the water pressure decreases, there may be a leak in the water pipe in the wall. At this point, you need to ask a professional overhaul.
5. Professional overhaul
If none of the above methods can accurately determine whether there is a water leak in the wall pipe, or to confirm the location of the leak but can not be repaired, it is recommended to call a professional plumbing overhauler to carry out overhaul and repair work. They have the experience and professional equipment to accurately detect and repair leaks.
In conclusion, detecting water pipe leaks in walls requires patience and skill. Practical methods such as observation, listening, temperature and water pressure can be used to initially determine the location and condition of the leak. If you are unable to fix it by yourself, it is wisest to hire a professional to overhaul and repair it.