Views: 2 Author: pqwt Publish Time: 2022-06-18 Origin: pqwt
The good or bad of the water supply network pipe greatly affects the daily life of the people, like the case of home leaks, usually leaking parts are more frequent with the usual life use of water places, in addition to their own investigation, but also need special maintenance personnel to detect leaks. Usually the leak is not found at the beginning, usually after a period of leakage on the ground or wall was found, because water infiltration has a time process, the time depends on the size of the leak, the reasons for the leak are also diverse, the most because of the use of aging and leakage, usually because the pipe cracking water seepage out, if the leak is exposed part is very good Solution, even individuals can be completed, while some, hidden in the wall or the ground of the deep leak will need to find a professional maintenance to check the investigation and then installation and repair.
If it is a cracked water pipe condition, you can replace the damaged cracks to repair, the most thorough method is to remove the brick and the bottom part, the most double waterproof mortar treatment, and then a closed water test to check if there is still a leak, if there is still a leak, you need to do again to seal the dense mortar filling, to ensure that there will be no leakage before you can. And observation is a very important way to identify, because the situation of water leakage will appear in a variety of ways, different ways represent the situation is different, so before dealing with the problem, or need to analyze the study to identify what is the specific reason for the problem to better deal with, to be able to solve the problem from the high root up.
What about underground pipe leaks? If you consider the economic benefits, leak detection is the only way to solve the leaky pipes. Leak detection, that is, through the application of professional equipment and instruments, a method to find underground water supply pipe leaks, is also a good way to solve the current pipeline has produced a leak problem. The working principle of the pipe leak detector is the pressure water pipe leak after the pressure water from the broken mouth of the pipe rushing out, and the sound vibration generated by the friction of the pipe wall and caused by other additional vibration to the pipe above the ground, with the pipe leak detector in the road to detect and find out the leak.
Generally speaking, the pipe leak detector detection method is, connect the host, headphones, sensors. Turn on the switch, put on the headset, place the sensor on the road above the pipeline, place it step by step according to the length of the pace, step by step listening, the closer to the leak, the stronger the signal, the farther away from the leak the weaker the signal, by comparing the signal strength between different points to achieve the purpose of detecting the leak. Therefore, we use the instrument, a single point to listen to the leak signal is not meaningful, to multi-point repeatedly compared, compared with the sound vibration of the larger place is the leak, of course, we have to consider many other additional factors, such as the direction of the leak breakage mouth, because the pipe is round, if the side of the leak, may be larger points instead in the side of the road above the pipe, rather than being the pipe Above the road, so the location of the pipeline to know, in addition to the tee, bend, water pressure, burial depth, buried layer, etc. will have an impact on the detection to take these into account.